I have mentioned in my tutorials that I exclusively use Bullseye Glass. I've been asked why, and I thougt it was important to discuss this.
Your choice of glass is probably the most important decision you will make as a kilnformer. It is your medium. Yes, the kiln, the glass cutter, your coldworking tools are important, but the glass is the thing you're working on.
I have not had extensive experience with all the various fusible glasses that are now available, so I will not comment on the relative merits or demerits of the other types of fusible glass available - but rather why I use Bullseye glass.
It is possible to have several different brands of glass in your studio at the same time. But, as you become more and more immersed in this artform you will find that there are innumerable reasons for projects to fail. Accidentally mixing incompatible glasses is one of those reasons. This potential problem is best avoided by never having incompatible sheets of glass in the studio at the same time.
There are types of glass that at first glance seem that they would be compatible with one another -- the most obvious of this is Uroboros 90 COE and Bullseye glass. And they probably are compatible... most of the time. But, one should still use caution when mixing these different brands of glass. Bullseye glass is guaranteed compatible only with Bullseye fusible glass. Not with other brands of COE90 glass, and not even with sheets of Bullseye non-fusible glass. There is more to compatibility than just COE. By Murphy's Law an issue will come up at the least opportune time.
Also, Bullseye glass is guaranteed to maintain its compatibilty through three full fuse firings. A full fuse firing is considered 1500 F.
So, that said, why do I like Bullseye glass? (keeping in mind that you're are not only dealing with the product, but the company that makes it.)
The huge numbers of colors available.
The availabilty of single rolled, double rolled, regular and thin sheets, as well as iridized in many, many colors.
The constant appearance of new colors and types of glass.
The large range of accessory glasses available (eg, frit, stringer, confetti), as well as rods, cullet, and billets.
The particular beauty, sophistication, and harmony of their colors.
The technical support provided by Bullseye in the form of classes, conferences, printed technical bulletins, and response to individual questions
The company's support for glass artists in the form of conferences, artist in residence programs, competitions, shows, publications, and their gallery in Portland.
The fact that I can push the glass well beyond it's stated temperature range, with minimal problems.
The fact that they sell direct and through distributors, but give volume discounts when they sell direct.
They also have developed products that work well with their glass, such as Thinfire paper and shelf separator. They also sell numerous products that make the kilnformer more successful (flat shelves, molds, etc etc)
Remember: Bullseye invented the concept of compatible fusible glass.
Recommended Video Tutorials: